eptronics, inc. ? los angeles, california ? t: 800 643-0688 ? e: sales@eptroncs.com ? www.eptronics.com ? rev. 08/01/2010 150 watt - ldad150w series constant voltage or constant current led driver with dimming led optimized drivers led optimized drivers led optimized drivers 1 specifications subject to change without notice custom designs available. please consult with the factory. eptronics, inc. ? los angeles, california ? t: 800 643-0688 ? e: sales@eptronics.com ? www.eptronics.com ? rev a1.2? 02/04/2014 dimming 150w ldad150w series 1 1. ul8750, en61347, csa 22.2 safety compliant 2. fcc, 47cfr part 15 class b compliant 3. water resistant and dust proof design: ip66, nema6, for dusty, dry, damp & wet locations. 4. compact, lightweight design. 5. safety isolation between primary and secondary 6. meets en61000-3-2 & en61000-3-3 class c 7. protection: output over-vol tage, output over-current, output short circuit, reset by power cycling. 8. transient protection built in. 1. operating temperature: tc 90c maximum. reference -30 to +60c ambient 2. storage temperature range: -40 to +85c 3. humidity (non-condensing): 5% - 95%rh 4. cooling: convection 5. vibration frequency: 5-55hz/2g, 30 minutes 6. impact resistance: 1g/s 7. mtbf@ 40 o c: 260,000 hours @ full load per mil-217f notice 2. input voltage range: 90 to 305vac or 108-250vdc frequency: 47 - 63hz or 0hz (dc) power factor: > 0.90 at > 70% load, 120vac/230vac/277vac 50/60hz thd%: < 20% at > 70% load, 120vac/230vac/277vac 50/60hz inrush current: <30a at 25c, 277vac, cold start, full load input current: 0.76a max @ 230vac, 1.44a max @ 120vac, full load efficiency: up to 92% typical at 230vac full load constant current regulation: +/ -3% over input line variation load regulation accuracy: +/-4% leakage current: 600ua typical; hold up time: half cycle constant current versions e325626 ip66 drive mode: constant current or constant voltage technology: pfc corrected 2-stage switch mode output power: 150w max. input voltage: 90 to 305vac, 50/60hz, 108-250vdc number of outputs: one output voltages: 8vdc - 428vdc output currents: 350ma - 6250ma optional 0-10v or pwm positive dimming 10% ~ 100% environmental electrical specifications at 25 o c safety and compliance model: ldad150w series part number (2)(5) output voltage range output constant current current accuracy output power maximum typical efficiency (1) LDAD150W-428-c0350 142 - 428 vdc 350 ma + 5% 150w 92% ldad150w-333-c0450 111 - 333 vdc 450 ma + 5% 150w 92% ldad150w-283-c0530 95 - 283 vdc 530 ma + 5% 150w 91% ldad150w-214-c0700 72 - 214 vdc 700 ma + 5% 150w 91% ldad150w-142-c1050 48 - 142 vdc 1050 ma + 5% 150w 91% ldad150w-107-c1400 36 - 107 vdc 1400 ma + 5% 150w 91% ldad150w-85-c1750 29 - 85 vdc 1750 ma + 5% 150w 90% ldad150w-71-c2100 24 - 71 vdc 2100 ma + 5% 150w 90% ldad150w-61-c2450 21 - 61 vdc 2450 ma + 5% 150w 90% ldad150w-53-c2800 18 - 53 vdc 2800 ma + 5% 150w 90% ldad150w-48-c3150 16 - 48 vdc 3150 ma + 5% 150w 89% ldad150w-42-c3500 14 - 42 vdc 3500 ma + 5% 150w 89% ldad150w-35-c4200 12 - 35 vdc 4200 ma + 5% 150w 89% ldad150w-30-c4900 10 - 30 vdc 4900 ma + 5% 150w 88% ldad150w-24-c6250 8 - 24 vdc 6250 ma + 5% 150w 88% notes 1. typical efficiency measured at 230vac input, full load 2. for dimmable versions add approp riate designator to the end of the part number: for example: ldad150w-24-c6250-rd is 0-10v o r resistance dimmable version, ldad150w-24-c6250-pd is pwm dimmable version. -rd 0-10v & resistance dimmable version comes with an extra two wires +purple/-grey on the output side. -pd pwm dimmable version comes with an extr a two wires +purple/-grey on the output side. 3. -rd 0-10v dimming is compatible with most quality 0-10v wall dimmers and direct 0-10v analog signal. see page 3 for details. 4. -pd pwm version is pwm dimmable via a pos itive 10% to 100% duty cycle, 200hz to 1khz, 0-10v pulse. see page 4 for details. 5. all models are ul & cul non-class 2 output
eptronics, inc. ? los angeles, california ? t: 800 643-0688 ? e: sales@eptronics.com ? www.eptronics.com ? rev a1.2 - 02/04/2014 specifications subject to change without notice custom designs available. please consult with the factory. dimming 150w ldad150w series 2 led optimized drivers led optimized drivers led optimized drivers 30 watt - ld30w series constant voltage or constant current led driver with dim- ming 150 watt - ldad150w series constant voltage or constant current led driver with dimming constant voltage versions part number (5) output constant voltage output current range voltage accuracy output power maximum typical efficiency (1) LDAD150W-428 428 vdc 88 - 350 ma + 5% 150w 92% ldad150w-333 333 vdc 113 - 450 ma + 5% 150w 92% ldad150w-283 283 vdc 133 - 530 ma + 5% 150w 91% ldad150w-214 214 vdc 175 - 700 ma + 5% 150w 91% ldad150w-142 142 vdc 263 - 1050 ma + 5% 150w 91% ldad150w-107 107 vdc 350 - 1400 ma + 5% 150w 91% ldad150w-85 85 vdc 438 - 1750 ma + 5% 150w 90% ldad150w-71 71 vdc 525 - 2100 ma + 5% 150w 90% ldad150w-61 61 vdc 613 - 2450 ma + 5% 150w 90% ldad150w-53 53 vdc 700 - 2800 ma + 5% 150w 90% ldad150w-48 47 vdc 788 - 3150 ma + 5% 150w 89% ldad150w-42 42 vdc 875 - 3500 ma + 5% 150w 89% ldad150w-35 35 vdc 1050 - 4200 ma + 5% 150w 89% ldad150w-30 30 vdc 1225 - 4900 ma + 5% 150w 88% ldad150w-24 24 vdc 1563 - 6250 ma + 5% 150w 88% labeling example mechanical dimensions: inches [mm] material: black aluminum housing fully encapsulated weight: 690 grams (24.4 oz) typical
eptronics, inc. ? los angeles, california ? t: 800 643-0688 ? e: sales@eptronics.com ? www.eptronics.com ? rev a1.2 - 02/04/2014 led optimized drivers led optimized drivers led optimized drivers specifications subject to change without notice custom designs available. please consult with the factory. 150 watt - ldad150w series constant voltage or constant current led driver with dimming dimming 150w ldad150w series 3 -rd 2-wire 0-10v ccr dimming scheme parameters minimum typical maximum source current out of 0-10v purple wire 0ma ? 2ma absolute voltage range on 0-10v (+) purple wire -2.0v ? +15v sink current into 0-10v purple wire 0ma ? 1.2ma notes 1. -rd 0-10v dimmable version comes with an extra two wires +purple/-grey on the output side. 2. -rd version is compatible with most 0-10v wa ll slide dimmers and direct 0-10v analog signal. recommended wall slide dimmer is leviton ip710 or equivalent 3. -rd 0-10v dimmable version is not intended to dim below about 5% @ 0v or 10% @ 1.0v 4. -rd 0-10v dimmable version output will be 100% with purple/grey open and minimum with purple/grey shorted. dim (-) grey ldad150w-xx-cxxxx-rd dim (+) purple dim (-) grey ldad150w-xx-cxxxx-rd dim (+) purple v -rd 2-wire resistance dimming scheme -rd 2-wire 0-10v analog dimming scheme ip710 wall dimmer 0-10v sink
eptronics, inc. ? los angeles, california ? t: 800 643-0688 ? e: sales@eptronics.com ? www.eptronics.com ? rev a1.2 - 02/04/2014 specifications subject to change without notice custom designs available. please consult with the factory. dimming 150w ldad150w series 4 led optimized drivers led optimized drivers led optimized drivers 30 watt - ld30w series constant voltage or constant current led driver with dim- ming 150 watt - ldad150w series constant voltage or constant current led driver with dimming -pd 2-wire ccr pwm positive dimming scheme parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +15v input low level voltage range (purple wire) -2.0v 0v +5.5v input high level voltage range (purple wire) +9.0v 10v +15v current into pwm input (purple wire) 0ma ? 1.2ma source current out of pwm input (purple wire) 0ma ? 2ma pwm input signal positive duty cycle 0% 10-90% 100% pwm input signal frequency 500hz ? 1500hz 1. -pd pwm dimmable version comes with an ex tra 2 wires +purple/-grey on the output side. 2. -pd pwm dimmable version is not intended to dim below about 5% @ 0% duty cycle or 10% @ 10% duty cycle 3. -pd pwm dimmable version output will be 100% with pu rple/grey open and minimum with purple/grey shorted. notes ldad150w-xx-cxxxx-pd pwm (+) purple pwm (-) grey pwm in sink -pd 2-wire pwm positive dimming scheme
|
